How to Fix Failed NTFS.sys in Windows 10

If you are also getting the NTFS.sys failed error code on your screen, you can take the help of the most effective solutions offered in this guide to fix the issue with ease. 

The Blue Screen of Death (BSOD) is one of the most annoying and troubling issues of all time. The error is a nightmare for Windows users as it takes up the system and prevents it from starting the system. The chances of BSOD fixing itself are quite low. Hence, the error may not go away and may reappear on the screen repeatedly until you do something about it. 

NTFS.sys Failed is a blue screen error of this type. The New Technology File System, or NTFS, is the main file management system that is widely used in Windows NT operating systems and Windows Servers. The NTFS.sys blue screen error is quite complicated and reappears on the system repeatedly. If this error persists, it can cause system crashes and may even result in data loss. 

In this guide, we will have a look at some of the best solutions to fix the NTFS.sys Failed error. Let’s have a look at the same right below. 

Solutions to Fix the System Service Exception NTFS.sys in Windows 10

The following sections of this guide will look at some of the best solutions to fix the NTFS.sys failed error on Windows. All the solutions offered below will help you get rid of this issue without facing any complications. Start with the first one below and try all the solutions until this issue is fixed. 

Solution 1: Enable Safe Mode to Fix the NTFS.sys Error

One of the best fixes to get rid of NTFS.sys failed error is to enable the Safe Mode in Windows. You will need to use the Windows Recovery Environment (WinRE) to enable safe mode. The procedure to use the environment is quite easy and is described right below for your ease: 

• Restart the system if it is stuck on the Blue Screen of Death page.
• Restart the system at least three times so that the system can automatically enter the Windows Recovery Environment (WinRE).
• When the WinRe setup appears, click on the Advanced Options button.

• Now, the system will ask you to pick an option from the list. Click on the Troubleshoot button to proceed.

• Again, proceed with the Advanced Options button to initiate the process.

• When all the options appear, click on the Startup Settings button.

• Finally, click on the Restart button present at the bottom of the screen to restart the system.

Also know: How to Fix Windows Modules Installer Worker Using High CPU

Solution 2: Use the SFC Scan

Here’s the next solution that can help you fix the NTFS.sys failed error with ease. You can run the SFC scan to figure out the faulty system files that may be interfering with the performance of the system and thus, showing the BSOD error. The System File Checker scan will eliminate and fix all the troublesome files. Follow the steps offered below to proceed: 

• Restart the system if it is stuck on the Blue Screen of Death page.
• Restart the system at least three times so that the system can automatically enter the Windows Recovery Environment (WinRE).
• When the WinRe setup appears, click on the Advanced Options button.

• Now, the system will ask you to pick an option from the list. Click on the Troubleshoot button to proceed.

• Again, proceed with the Advanced Options button to initiate the process.

• When all the options appear, click on the Command Prompt button.

• When the tool appears, type the following command and press the Enter key.

sfc /scannow

Wait for the scan to complete. The scan will automatically get rid of the faulty files or fix them as required. Now, restart the system to see if the NTFS.sys error still appears on your Windows. If it does, you can follow the next solution. 

Solution 3: Use the Check Disk Scan

Here’s the last solution that can help you fix the NTFS.sys failed error on Windows 11/10. Just like the SFC scan, you can also use the chkdsk scan to see if there are any issues with the disk. The process to use the check disk scan is quite simple and provided right below: 

• Restart the system if it is stuck on the Blue Screen of Death page.
• Restart the system at least three times so that the system can automatically enter the Windows Recovery Environment (WinRE).
• When the WinRe setup appears, click on the Advanced Options button.

• Now, the system will ask you to pick an option from the list. Click on the Troubleshoot button to proceed.

• Again, proceed with the Advanced Options button to initiate the process.

• When all the options appear, click on the Command Prompt button.

• When the tool appears, type the following command and press the Enter key.

chkdsk f: /f

Also know: How to Fix Windows Could Not Automatically Detect This Network’s Proxy Settings Error

NTFS.sys Blue Screen Error: Fixed

In the previous sections of this write-up, we had a look at some of the best methods to fix the NTFS.sys failed error. If you have any questions related to the guide, you can ask your questions in the comments section below.